Special tools

€ 9,48:-
In stock
2839

Cable lubricator tool

 Cable lubricator tool - A must have for every mechanic !  Lubricate your wires and cables in no time at all with this smart tool, no…

 Cable lubricator tool - A must have for every mechanic !  Lubricate your wires and cables in no time at all with this smart tool, no disassembly required.  The tool is fitted over opening of the cable housing and thereafter tightened, this seals up the housing and forces…

€ 9,30:-
In stock
35303

Gauge for ingnition Raket 95

 Guage to exactly put the flywheel in ignition position.  It has been hard to find the exact position of the ignition, but thanks to…

 Guage to exactly put the flywheel in ignition position.  It has been hard to find the exact position of the ignition, but thanks to this gauge that you mount on the flywheel is it very easy to exactly measure the ignition.  It is delivered together with an instructions on…

€ 12,58:-
In stock
GP Discovery Headlight, Bright CH32
NEW
47016

GP Discovery Headlight, Bright CH32

 Bright is a simple headlight with good basic functions. It is perfect for use in and around the home.      Lumen:…

 Bright is a simple headlight with good basic functions. It is perfect for use in and around the home.      Lumen: 80 lm  Light length: 30 m  Burning time: 8 h  Light modes: High - Low - SOS  Adjustable…

€ 18,69:-
In stock
Carburator Spring Tool VHSH 30
NEW
4739

Carburator Spring Tool VHSH 30

 Spring tools for Dellorto VHSH 30 series. Perfect tool for changine the throttle needle. You use the tool to unscrew the throttle from the…

 Spring tools for Dellorto VHSH 30 series. Perfect tool for changine the throttle needle. You use the tool to unscrew the throttle from the needle.   It holds the spring in place in compressed position so you can easily move the needle position.  Fits KZ carburetor…

€ 12,11:-
On its way to our warehouse
Carburator Spring Tool VHSH 34, Rotax Max
NEW
4740

Carburator Spring Tool VHSH 34, Rotax Max

 Spring tools for Dellorto VHSH 34 series. Perfect tool for changine the throttle needle. You use the tool to unscrew the throttle from the…

 Spring tools for Dellorto VHSH 34 series. Perfect tool for changine the throttle needle. You use the tool to unscrew the throttle from the needle.   It holds the spring in place in compressed position so you can easily move the needle position.  Fits all Rotax Max…

€ 12,11:-
On its way to our warehouse
Engine hourmeter
35% OFF
50010

Engine hourmeter

 The Oppama Pulse PET 3200R hour counter is one of the worlds smallest and best performing hour counter. An absolute necessity to keep…

 The Oppama Pulse PET 3200R hour counter is one of the worlds smallest and best performing hour counter. An absolute necessity to keep track of your engines run time and ensure you´re maintaining the recommended service schedule.  The hour counter is only 3x3cm wide and has a…

€ 56,24:- € 85,92:-
In stock
€ 13,99:-
In stock
5051

Puller for fly wheel, Raket 85/95/120

 You can remove the flywheel on a Raket 95 engine with this flywheel puller  The flywheel is attached to a cone on the crankshaft and…

 You can remove the flywheel on a Raket 95 engine with this flywheel puller  The flywheel is attached to a cone on the crankshaft and can sit really hard but with the help of the original Raket flywheel extractor makes your job easier.  Be sure to tighten the screws in the…

€ 10,33:-
In stock
€ 36,62:-
In stock
€ 32,86:-
In stock
50705

Spring hook

 You need a good tool to remove the springs that holds the exhaust  / muffler. It is easy to slip when removing the springs, so get a…

 You need a good tool to remove the springs that holds the exhaust  / muffler. It is easy to slip when removing the springs, so get a simple tool that makes work easier.  The spring hook has a plastic handle and the hook of metal. Fits most common springs on a kart or…

€ 13,05:-
1-3 days
5082

Screwdriver Tillotson Quick Jet

 Introducing the new QuickJet™ manual jet adjuster by Tillotson Racing. The QuickJet adjuster fits all Tillotson HW and HL carburetors and most…

 Introducing the new QuickJet™ manual jet adjuster by Tillotson Racing. The QuickJet adjuster fits all Tillotson HW and HL carburetors and most other brands of racing carburetors, as well as lawn and garden carburetors with standard (non-EPA) adjustment needles. The QuickJet adjuster helps you…

€ 74,18:-
In stock
508709

Oil Sealing Tool Raket 95

A tool to make it simple to mount oilsealings to a Raket 95

A tool to make it simple to mount oilsealings to a Raket 95

€ 7,89:-
In stock
5090

Mounting tool for Spark Plug Cap

  Tool to mount the sparkplug cap on a Raket 60/85/120 engine 

  Tool to mount the sparkplug cap on a Raket 60/85/120 engine 

€ 43,19:-
In stock
514730

Mounting tool for rear axle 30 mm

 Mounting and dismounting tool for rear axles. Very handy tool so you do not destroy the edges of your valuable rearaxles. 

 Mounting and dismounting tool for rear axles. Very handy tool so you do not destroy the edges of your valuable rearaxles. 

€ 44,04:-
€ 51,17:-
In stock
Carburettor Tester Table Pro Model
NEW
€ 121,13:-
In stock
Puller for Clutch Iame X30
NEW
5291

Puller for Clutch Iame X30

 Puller for the clutch on a Iame X30 engine 

 Puller for the clutch on a Iame X30 engine 

€ 16,81:-
In stock
Tillett T-Board seat fitting jig
NEW
5292

Tillett T-Board seat fitting jig

 T Board - The Highest Quality Seat Fitting Tool  Seat fitting is without doubt one of the most time consuming jobs on the kart.…

 T Board - The Highest Quality Seat Fitting Tool  Seat fitting is without doubt one of the most time consuming jobs on the kart. Accurately positioning a seat (which if 5 mm out, will be detectable in the lap times) is difficult when you take into account the varying shapes, sizes…

€ 469,01:-
In stock
Stone Front Wheel Alignment Laser Kit SED-100
NEW
57979

Stone Front Wheel Alignment Laser Kit SED-100

 LASER ALIGMENT SET   Tecnical data:    The analog plates are mounted instead of the front…

 LASER ALIGMENT SET   Tecnical data:    The analog plates are mounted instead of the front wheels.  There is no need for removing the front brake system or wheel flanges.  The laser measuring unit is built into the measuring plates to…

€ 562,44:-
In stock
57988

Analog Front Wheel Alignment Plates Stone

 What settings do you really have on your front end?  Did you know that when you set the kart down with the driver, the camber angle…

 What settings do you really have on your front end?  Did you know that when you set the kart down with the driver, the camber angle changes up to 5 units on your Sniper instrument. This is because the frame flexes differently when you gain weight in the frame.  Extra…

€ 79,72:-
In stock
57989

Lazer/Sniper support for Stone Front Wheel Alignment Plates

 Support for Sniper frontwheel alignment plates. With roller ball under so you can move the kart on the floor while checking the…

 Support for Sniper frontwheel alignment plates. With roller ball under so you can move the kart on the floor while checking the front.  You need this kit to use Sniper on the frontweel alignment plates. 

€ 74,18:-
In stock
€ 22,07:-
Few in stock
€ 27,23:-
In stock
€ 22,54:-
Not in stock
€ 330,52:-
Not in stock
€ 280,75:-
Not in stock
€ 16,81:-
In stock
7153

Tolk Rotax Avgasport Höjd 2017-

 Tolk Avgasports Höjd 2017- 

 Tolk Avgasports Höjd 2017- 

€ 24,51:-
Not in stock
7155

Monteringsverktyg För Tätningsring Rotax DD2

 Monteringsverktyg för den stora packboxen för hålaxeln i en DD2 motor 

 Monteringsverktyg för den stora packboxen för hålaxeln i en DD2 motor 

€ 61,31:-
Not in stock
7156

Woodruff key DD2 3x5 mm

 Do you need a woodruff key for your DD2?  

 Do you need a woodruff key for your DD2?  

€ 2,35:-
In stock
7217

Locking tool for starter gear DD2

 Do you need a locking tool for starter gear DD2?   

 Do you need a locking tool for starter gear DD2?   

€ 18,22:-
In stock
7521

Screw for lignition switch DD2 Plastite 6x25

 Do you need a screw for lignition switch DD2? We got all spare parts you need for your go-kart!  

 Do you need a screw for lignition switch DD2? We got all spare parts you need for your go-kart!  

€ 1,03:-
In stock
€ 20,66:-
In stock
€ 46,85:-
In stock
€ 697,65:-
Not in stock
€ 50,80:-
In stock
€ 21,60:-
In stock
7852

Jet Holder with Rotax Print

 Jet holder for the Dellorto carburettor used for Rotax Max engines.  It fits 35 jets so it probably holds all your jets that you…

 Jet holder for the Dellorto carburettor used for Rotax Max engines.  It fits 35 jets so it probably holds all your jets that you might have.  It is well designed, milled from one piece of aluminium which is then anodized and laser engraved with the Rotax…

€ 37,46:-
In stock
€ 187,32:-
In stock
Exhaust spring tool
NEW
9006

Exhaust spring tool

 Exhaust spring tool for removal and assembly of strong springs for exhaust systems and similar.   Made from hardened steel with…

 Exhaust spring tool for removal and assembly of strong springs for exhaust systems and similar.   Made from hardened steel with a soft rubber coating to protect your fingers.   The tip of the tool is angled to help with the…

€ 6,48:-
In stock