We have lead weights in different shapes so that it fits your kart correctly
Lead is usually mounted on the seat so that the weight distribution becomes correct. For example, you can use 1 or 2 kilos weights and place them between the pedals when you want more weight on the front to change steering and grip.
All weights should be fitted with two screws, the minimum requirement is 2 M6 screws, but we always recommend using M8.
When installing screws in the seat we have countersunk screws and suitable washers in different sizes.
There are also low profile screws that are good for not sticking out in the seat.
Size:
- Size: 15x8x2 cm
