Manual Rope Start kit R85 with clutch

Tired of push-starting your old 85cc engine? Here's a complete kit for your Raket 85 engine that converts it from push start to recoil start (pull-start). Thanks to the centrifugal clutch, the kart can also idle at a standstill.

The kit consists of a starter cover complete with recoil-start mechanism.

Centrifugal clutch with needle bearing, washers and 12-tooth drum.

Flywheel adapted for the pull-start mechanism.

Download and read the fitting instructions to ensure a good result.

When fitting the flywheel, it must sit on the key on the crankshaft, and you use the keyway marked 1 or * on the flywheel.

The key to be used has item number 3095.

To remove your old flywheel, you need a puller (Item no: 5051)

• Manual Raket 85.pdf