DG-360 Digital Degree Gauge

A digital degree wheel that attaches directly to the flywheel nut, for easy measurement of port timing on e.g. Raket 95

A stop screw for mounting in the crankcase and a 14mm socket are included.

For accurate measurement of Raket 95, a feeler gauge with article number 330414 is required

To prevent the socket from being loose on the nut, it can be a good idea to place a piece of duct tape or similar over the nut before fitting the degree wheel's socket.

The tool can of course also be used on other engines!

Socket connection 3/8

Width of hole for stop screw 6mm

Total length of the tool is 150mm.

Current port timing for Raket 95 according to SBF's ruling:

SBF Official Announcement