Puller for fly wheel, Raket 85/95/120

With the flywheel puller you can remove the flywheel on a Raket 95 engine.

The flywheel is fitted on a taper on the crankshaft and can sit very tight. You then use the original Raket flywheel puller, which you screw onto the flywheel with the supplied screws.

Be careful to screw the screws firmly into the flywheel so you don't risk stripping the threads when you then pull the flywheel off. It's a good idea to use an impact wrench to pull the flywheel off with the M10 bolt.

A tip: Use a gauge and dial indicator, available in a complete kit, when screwing the flywheel back on.

The tool is developed by Radne Motor, the company that developed and manufactures the Raket engine. It may look simple, but it works really well.

• Developed by the engine manufacturer
• Simple design